Improved Electrocatalytic Activity and Stability by Single Iridium Atoms on Iron-based Layered Double Hydroxides for Oxygen Evolution

Full understanding to the origin of the catalytic performance of a supported nanocatalyst from the points of view of both the active component and support is significant for the achievement of high performance. Herein, based on a model electrocatalyst of single-iridium-atom-doped iron (Fe)-based layered double hydroxides (LDH) for oxygen evolution reaction (OER), we reveal the first completed origin of the catalytic performance of such supported nanocatalysts. Specially, besides the activity enhancement of Ir sites by LDH support, the stability of surface Fe sites is enhanced by doped Ir sites: DFT calculation shows that the Ir sites can reduce the activity and enhance the stability of the nearby Fe sites; while further finite element simulations indicate, the stability enhancement of distant Fe sites could be attributed to the much low concentration of OER reactant (hydroxyl ions, OH⁻) around them induced by the much fast consumption of OH⁻ on highly active Ir sites. These new findings about the interaction between the main active components and supports are applicable in principle to other heterogeneous nanocatalysts and provide a completed understanding to the catalytic performance of heterogeneous nanocatalysts.     

基于RFM的机载余度计算机软件快速测试平台

现代飞机普遍采用电传飞行控制系统,飞行控制计算机是该系统的核心。为了提升飞控计算机的可靠性,普遍采用余度技术构建余度飞控计算机,该计算机由多个通道构成,每个通道有一个CPU,互相构成备份。但是,这给飞控计算机的软件调试和测试带来的巨大的困难,因为各个通道的机载软件之间相互同步、通信和交叉监控,必须并行调试和测试,这就造成了机载软件调试和测试的滞后,必须等待真实的飞控计算机开发出来之后才能开展工作。本文提出了一种基于RFM(反射内存)的余度计算机快速原型测试平台设计方法。该平台使用商用货架产品构成余度计算机的多个冗余通道,使用RFM模拟多通道间的通信、同步过程,通过对底层驱动封装实现硬件故障模拟和余度功能模拟,方便实现软件调试和从性能、功能测试,大大提高了开发效率,减少了研制周期。     

Eutectic Molecular Liquids Based on Hydrogen Bonding and π–π Interaction for Exfoliating Two‐dimensional Materials and Recycling Polymers

Eutectic molecular liquids (EMLs) based on hydrogen‐bonding interaction and π–π stacking were prepared. We found that the thermodynamic properties like initial decomposition temperature and glass transition temperature of EMLs are mainly dominated by the hydrogen bond donor, which is beneficial for designing and preparing new EMLs. These new liquid systems could be applied in the field of environmental and material science.     

Surface Charge‐Reversible Tubular Micromotors for Extraction of Nucleic Acids in Microsystems

Extraction of nucleic acids in microsystems is of significance for biomedical applications, but the current extraction methods generally require sophisticated microchannels and external equipment, hindering their practical applications. In this work, we have demonstrated a simple, versatile and efficient approach to extract nucleic acids in microsystems by developing cationic branched polyethyleneimine (PEI)‐functionalized tubular micromotors. The as‐developed tubular micromotors are fabricated by a two‐step process combining the template‐assisted electrodeposition and carbodiimide chemistry, and contain an inner catalytic Pt layer, a middle magnetic Ni layer and an outer cationic PEI layer. They exhibit autonomous bubble‐propelled motion in aqueous hydrogen peroxide solutions, which can be guided by an external magnetic field, and the surface charges can be reversibly modulated by changing the pH value of the solution. Consequently, the as‐developed tubular micromotors can selectively absorb nucleic acids from acidic solutions and desorb them into alkaline solutions, leading to the extraction of nucleic acids with high efficiency without external stirring. Furthermore, they can be operated in a microchannel chip without the aid of a pumping system. Our results indicate that this PEI‐functionalized tubular micromotor platform provides a novel, simple and versatile microsystem nucleic acid extraction technology, holding considerable promise for important practical applications.     

柠檬酸试剂中痕量无机阴阳离子的离子色谱法测定

选用柱容量较高、亲水性较强的阴离子分析柱IonPac AS18,以30mmol／L KOH为淋洗液,等度淋洗分析了高浓度柠檬酸中的痕量无机阴离子。选用柱容量较高的阳离子分析柱IonPac CS12A,以H2SO4作淋洗液分析了柠檬酸试剂中的痕量阳离子。在所选色谱条件下,无需样品前处理,直接进样,电导检测,高浓度柠檬酸不影响痕量阴离子或阳离子的测定。方法具有良好的线性(r=0．9941～1．000),样品中所测离子峰面积的相对标准偏差(RSD)均在9．0％以下(n=7),回收率在82．7％～110％之间,检出限低于3．7μg/L。     

直接进样离子色谱法测定磷酸试剂中痕量无机阴、阳离子

选用亲水性强、柱容量高的阴离子分析柱IonPac AS18,以22 mmol/L KOH为淋洗液作等浓度淋洗,直接进样分析了高浓度磷酸中的痕量无机阴离子.选用柱容量较高的阳离子分析柱IonPac CS12A,H2SO4作为淋洗液直接进样分析了磷酸试剂中的痕量阳离子.该方法无需样品前处理,直接进样,电导检测,高浓度磷酸的存在不影响痕量阴离子或阳离子的测定,对所测的无机阴阳离子的检出限均在2.1μg/L以下,测定范围在两个数量级以上,线性相关系数r在0.994 1～0.999 9范围内,样品中待测离子峰面积的RSD在3.8%以下(n=7),回收率在91%～109%之间.     

限进介质固相萃取及其应用

系统地介绍了限进介质固相萃取的原理、特点、发展现状及其发展趋势,并对该技术在生物和环境样品前处理中的应用作了较详细的综述。引用文献58篇。     

Synthesis and characterization of Al doped δ-laminar crystal sodium silicate

An modified laminar crystal sodium silicate(Al-SKS-6)was synthesized by spray drying and high temperature crystallization using sodium silicate as silicon source,Al atom as inorganic source and hexadecyltrimethy ammomum bromide(CTMAB)as the structure template.The hydrothermal stability of product was at least 1 h.The synthesized material was characterized by XRD and SEM.The results indicated that shape and intensity of XRD diffraction peak at 20 took changes.but raw material δ phase crystal form kept unchanged.and assured high Ca2+ and Mg2+ binding capacity of the products.The Ca2+ and Mg2+ binding capacity of product is up to 380 mg Ca/g and 410mg Mg/g respectively.It was found that the hole of product became smaller and appeared rod structure based on SEM. The hydrothermal stability was increased due to the pillaring of A1 atom.     

Lanthanide (III) addition of [Mo2O3S(HNTA)2] (Ln=Eu, Dy)

The reactions of LnCl₃·6H₂O (Ln=Eu or Dy) and Na₂[Mo₂O₃S(HNTA)₂]·6H₂O afford Na[Mo₂O₃S(HNTA)₂]₂·Eu(H₂O)₉·3H₂O (1) (NTA=nitrilotriacetate) and Na{(H₂O)₆Dy[Mo₂O₃S(HNTA)₂]₂}·7.5H₂O (2), respectively. The [Mo₂O₃S(HNTA)₂]²⁻ cluster units of 1 are interconnected by Na⁺ into a 3-D open framework with rutile topology templated by . The coordination of [Mo₂O₃S(HNTA)₂]²⁻ to the slightly smaller Dy³⁺ ion of greater ionic potential as a consequence of lanthanide contraction has been observed to form the pentanuclear heterometallic {Dy(H₂O)₆[Mo₂O₃S(HNTA)₂]₂}⁻, which is linked by Na⁺ and hydrogen bonds between the protonated carboxylate groups into a 3-D supramolecular framework. The weak antiferromagnetic interactions between the Dy³⁺ ions of 2 have been observed.